Shimano Sustain FJ
DESCRIPTION
FEATURES
HAGANE Gear
With amazing strength and durability, the HAGANE Gear is at the very heart of most Shimano reels. Shimano, through the application of state-of-the-art technologies, gives anglers the long-lasting smoothness and pleasure that is felt when anglers first use a reel, over and over again. No cutting work is applied to the teeth of the drive gear during fabrication, instead the entire surface is calculated in minute detail by special 3D-design and then formed by Shimano's cold-forging technology. The result is assured resilience. HAGANE Gear is the fruit of Shimano's inexhaustible pursuit for durability — the strength and power of forged metal continues to represent the fundamental concept of Shimano reels.
Shimano's exclusive manufacturing technology further advances MicroModule Gear II with a state-of-the-art gear-tooth surface design. The surfaces of the drive gear and pinion gear have been analyzed and updated from the ground up in Shimano’s pursuit of perfection to further improve the smooth gear feeling and reducing sound.
X-Ship provides improved gear durability. By supporting the pinion gear on both ends with bearings, the pinion gear maintains precise alignment with the drive gear. This allows the gears to stay in the same position under the heaviest loads. The added benefit of X-Ship technology is that friction between the spool shaft and gear are eliminated. This further benefits anglers with enhanced casting performance and casting distance of lighter lures.
The HAGANE Body is a metal reel body with high rigidity. The body rigidity and impact resistance virtually eliminates body flexing on the reel while fighting fish. The result transforms the angler's actions directly into cranking power, increasing efficiency through strength.
For medium and small general-purpose spinning reels, which require lighter spinning, we focused on a non-contact structure that does not compromise the lightness of the spinning. In addition to conventional water-repellent treatment, a labyrinth structure that suppresses water penetration is combined to achieve high water-resistant performance despite the non-contact nature of the structure. It is used in the stopper bearing section and line roller section. Large reels for saltwater, a contact-type water-resistant structure is used for large spinning reels that require higher water-resistant performance. By physically cutting off the entry path of seawater with a low-sliding seal member, high water-resistant performance is achieved while suppressing rotational resistance. The stopper bearing and line roller parts are adopted, and the stopper bearing part in particular achieves a water-resistant rating equivalent to IPX8.
G-Free Body technology has been developed to shift the reel's center of gravity closer to the rod. By moving the center of gravity closer to the angler’s hand, the G-Free Body helps to reduce fatigue and enhance casting comfort.
The spool has a special spool ring shape. This creates a rectifying effect on the line and realizes both suppression of line trouble and long casting performance.
The Long Stroke Spool has a longer stroke compared to conventional spool designs. This ultimately produces a smoother line lay during retrieval and translates into increased casting distance for anglers.
CI4 is a Shimano original material reinforced with carbon fiber that is lighter and has a higher strength than conventional resin material. CI4+ is an advanced version of the original CI4 material and is 2.5x more rigid than its predecessor. While improving lightness and rigidity, reel bodies and rotors built with CI4+ are further reduced in size and weight.
The Cross Carbon Drag material provides a wider range of drag settings compared to traditional drag materials. The Cross Carbon Drag provides the smoothest Shimano drag performance ever while providing anglers with increased durability.
S A-RB bearings are put through the same process as Shimano’s A-RB bearings but feature shields on both sides of the bearings. These shields reduce the possibility of salt or sand inhibiting rotation of the bearing.
One-Piece Bail allows the line to travel unimpeded to the line roller. The seamless design reduces friction and decreases the chance of tangles or the line catching on the bail arm.
SPECIFICATIONS
#SA2500HGFJ
Model: SA2500HGFJ
| Bearings | 9 (8BB, 1RB) |
| Gear Ratio | 6.0:1 |
| Line Per Handle Turn | 35” |
| Weight | 7.4 oz |
|
Line Capacity (Lb Test/Yards) |
Mono: 6/200, 8/140, 10/120 Power Pro: 10/150, 15/145, 30/100 |
| Max Drag | 20 Lbs |
| Retrieve | Reversible |
#SAC3000HGFJ
Model: SAC3000HGFJ
| Bearings | 9 (8BB, 1RB) |
| Gear Ratio | 6.0:1 |
| Line Per Handle Turn | 35” |
| Weight | 7.4 oz |
|
Line Capacity (Lb Test/Yards) |
Mono: 6/230, 8/170, 10/140 Power Pro: 10/200, 20/140, 40/105 |
| Max Drag | 20 Lbs |
| Retrieve | Reversible |
#SA4000XGFJ
Model: SA4000XGFJ
| Bearings | 9 (8BB, 1RB) |
| Gear Ratio | 6.2:1 |
| Line Per Handle Turn | 40” |
| Weight | 9.3 oz |
|
Line Capacity (Lb Test/Yards) |
Mono: 8/240, 10/200, 12/160 Power Pro: 15/230, 30/180, 50/120 |
| Max Drag | 24 Lbs |
| Retrieve | Reversible |
#SAC5000XGFJ
Model: SAC5000XGFJ
| Bearings | 9 (8BB, 1RB) |
| Gear Ratio | 6.2:1 |
| Line Per Handle Turn | 40" |
| Weight | 9.5 oz |
|
Line Capacity (Lb Test/Yards) |
Mono: 10/240, 12/195, 14/165 Power Pro: 20/260, 30/235, 40/185 |
| Max Drag | 24 Lbs |
| Retrieve | Reversible |
